DSC_2305 V3-Fog copy.jpg

DSC_3300 V2 copy-VS3.jpg

Vector System | Target Stand VS3

$349.99

Specifically designed for rapid deployment and versatility in all types target placement, this is the most useful target stand we could come up with.

Configurable for shooting steel or paper. Shoot plates in the long direction with 2x4’s. Shoot cardboard on the short side for IPSC spacing with 2×2’s or 1×2’s. Two T-posts also on the short side for hanging 2 smaller plates. Boards fit through the stand when collapsed so you can take one trip for setup.

Made from 3/16” A36 and intentionally designed for a large footprint so it stays put when you want it to. Bolt-together-design means parts are replaceable when damaged.

Because that wasn’t enough for us: The hole in the side is a drill size for a 3/8”-16 tap if you want to tap it and run your own jam bolt to lock in the 2×4 for carrying. There are additional tabs on the sides for stake holes to anchor it to the ground for those windy days.

Weighs around 19 lbs.

[Target Hanger VH3 sold separately]

———————

Specifically designed for rapid deployment and versatility in all types target placement, this is the most useful target stand we could come up with.

Configurable for shooting steel or paper. Shoot plates in the long direction with 2x4’s. Shoot cardboard on the short side for IPSC spacing with 2×2’s or 1×2’s. Two T-posts also on the short side for hanging 2 smaller plates. Boards fit through the stand when collapsed so you can take one trip for setup.

Made from 3/16” A36 and intentionally designed for a large footprint so it stays put when you want it to. Bolt-together-design means parts are replaceable when damaged.

Because that wasn’t enough for us: The hole in the side is a drill size for a 3/8”-16 tap if you want to tap it and run your own jam bolt to lock in the 2×4 for carrying. There are additional tabs on the sides for stake holes to anchor it to the ground for those windy days.

Weighs around 19 lbs.

[Target Hanger VH3 sold separately]

———————

Functional

The Vector System is designed to pack the most capability into one target stand. To make setup, transport, and tear down as simple as possible. To enable you to enjoy the most of your hobby.

Engineered

Latches are bolt on replacements. We can all agree you’ll never shoot them, so we’ll say your buddy did it.

a Mission

The T-post profile was intentionally designed to look like a cross, a physical representation of the way salvation has been delivered to us.

made in america

At Trunnion we believe in making all of our products right here in America. When we work together to support our local communities we all benefit.